TPU 95A (Flexible)
Flexible thermoplastic polyurethane with high elasticity, shock absorption, abrasion resistance, and rubber-like properties.
TPU 95A (Flexible) Calculators
TPU 95A (Flexible) (1.21 g/cm³)
Slicer Tuning & Cooling Profile
- Part Cooling Fan
- 50 - 100%
- Enclosure Requirement
- Not Required
- Polymer Specific Gravity
- 1.21 g/cm³
TPU 95A • Frequently Asked Questions
A standard 1 kg spool of 1.75 mm TPU 95A filament yields approximately 343.6 meters (1127 feet) of printable material based on its polymer density of 1.21 g/cm³.
Optimal extrusion temperature for TPU 95A is 210 - 235 °C with a heated bed temperature of 30 - 50 °C.
TPU 95A enclosure status: Not Required. Polymers like ABS, ASA, and Nylon emit ultrafine particles (UFPs) and VOCs and warp easily from ambient air drafts, whereas PLA and PETG print safely in open-frame printers.
Dry TPU 95A in a dedicated filament dryer or convection oven at 55 °C for 4 - 6 hours. Store with desiccant in vacuum-sealed bags to avoid steam popping, stringing, and brittle filament.
Clean the build plate thoroughly with warm water and grease-cutting dish soap (or 99% IPA). Set the part cooling fan to 50 - 100%, ensure first-layer squish is dialed in, and use a 5mm-8mm brim for tall or sharp-cornered models.