DIRECT ANSWER & CALCULATION BENCHMARK
How much does 100 meters of 1.75mm PLA filament weigh?
298.2 grams(approx. 0.298 kg)
100 meters of 1.75 mm PLA filament weighs approximately 298.2 grams (just under one-third of a standard 1kg roll).
Worked Mathematical Derivation
Key Formulation:
Length = 10,000 cm. Cross section = 0.02405 cm². Volume V = 10,000 × 0.02405 = 240.53 cm³. Weight = 240.53 cm³ × 1.24 g/cm³ = 298.25 grams.Calculate Custom Weight or Length
Adjust the values below or switch materials to calculate your custom spool size and length.
Conversion Mode
meters
Filament Diameter
1.24 g/cm³
RESULTS & BREAKDOWNV=πr²L
Total Filament Weight
298.3grams
≈ 0.298 kg (0.66 lbs)
Weight:298.25 g (0.298 kg)
Linear Mass:2.98 g/meter
Total Volume:240.53 cm³
Cross-Section Area:2.405 mm²
Quick Rule of Thumb
Standard 1.75mm PLA yields approximately 330–335 meters per 1 kg spool. PETG yields ~327m, and ABS yields ~400m due to lower density.⚡
Related 3D Printing Calculators
Remaining Filament on Spool Calculator→
Estimate usable grams and meters left on your spool using verified empty spool tare weights for Bambu Lab, Prusament, eSun, Hatchbox, and more.
3D Print Cost & Pricing Calculator→
Calculate material cost, electricity, machine wear, multi-color purge waste, and marketplace seller fees (Etsy, Shopify, eBay) with profit margins.
Frequently Asked Questions
How much does 100 meters of 1.75mm PLA filament weigh?
A standard 1 kg spool of PLA contains 298.2 grams (0.298 kg). Length = 10,000 cm. Cross section = 0.02405 cm². Volume V = 10,000 × 0.02405 = 240.53 cm³. Weight = 240.53 cm³ × 1.24 g/cm³ = 298.25 grams.
How many hours of printing can you get from 1kg of PLA?
A 1kg spool typically yields between 40 and 80 hours of active printing time, depending on layer height, printing speed, and infill density (e.g. standard 50g models taking 3-4 hours each).
How much does an empty 1kg filament spool weigh?
An empty 1kg filament spool typically weighs between 190g and 260g. Cardboard spools (eSun, Polymaker) weigh ~200g-220g, while sturdy plastic spools (Bambu Lab, Prusament) weigh ~240g-250g.
Why does a 1kg spool of PLA have a different length than other plastics?
Filament length is inversely proportional to polymer density (L = Volume / Area, where Volume = Mass / Density). Lighter polymers like ABS (1.04 g/cm³) yield ~400 meters per kg, while denser materials like PLA (1.24 g/cm³) yield ~335 meters, and PETG (1.27 g/cm³) yields ~327 meters.
How many standard 3DBenchy boats can you print from 1kg of PLA?
A standard sliced 3DBenchy with 2 perimeters and 10% infill weighs approximately 11 to 13 grams. A full 1kg spool can print approximately 75 to 90 complete Benchy models without running out.